CAUTION! Mounting the camera without the locking mechanism properly engaged may
result in the camera falling from its base. Damage to the camera may occur!
4.4 Hard Ceiling Installation (Pendant Mount)
Cut a 2
Step 1
Step 1
template provided with the camera (see sketch in Figure 4). Drill holes for wall
anchors.
Wall anchor holes
Step 2
Attach the base to the ceiling using the three screws and wall anchors provided.
The wires go up through the central hole in the camera base.
Ceiling
mounting holes
Step 3
Attach the safety cable and ribbon cable.
444-00001-00-10 Revision 110
3/8
" • d iameter hole in the surface where the Dome is to be mounted using the
Copyright © 2008 FLIR Systems, Inc.
Page 21 of 33