MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the seat
9.50
Fitting the seat
9.51
–
Insert the ignition key in the seat lock
–
Raise the rear of the seat, push it towards the rear, and remove it upwards.
700245-01
–
Position the recesses of the seat to the lugs on the frame, lower the rear end and simul-
taneously push it forward.
–
Lock the seat by turning the ignition key in the seat lock.
–
Remove the ignition key from the seat lock.
–
Finally, check that the seat is correctly mounted.
700269-01
and turn it counterclockwise.
154