KTM 2008 1190 RC8 USA Owner's Manual page 128

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
The shift rod can be mounted both on the shift lever variably at an upper or lower posi-
tion, and on the reverse gear change of the shift shaft in two different positions.
Guideline
Standard

0 0 A A
Shift power low, long shift travel
Shift power high, short shift travel
0 0 B B
–
Position the shift rod.
–
Tighten the screws.
Guideline
Screw, shift rod
0 0 C C
400479-10
Shift lever: lower drill hole,
shift shaft: lower drill hole
Shift lever: lower drill hole,

shift shaft: upper drill hole
Shift lever: upper drill hole,

shift shaft: lower drill hole
M6 12 Nm
(8.9 lbf ft)
126
Loctite ® 243™