Odo Menu - KTM 2008 1190 RC8 USA Owner's Manual

CONTROLS

ODO menu

5.17
Condition
• The ignition is on.
• ROAD mode
–
Press the MODE button briefly and repeatedly until ODO appears at the top left of the
info display.
ODO shows the total distance covered.
TripDist shows the distance covered since the last reset. For example, this could be between
two refueling stops. TripDist is always running and counts up to 999.9.
TripTime shows the trip time on the basis of TripDist and resumes running as soon as a
400438-01
speed signal is received.
The calculation of this value starts with the first speed signal and ends three seconds after
the last speed signal.
AvgSpeed (average speed) is coupled with TripDist and TripTime.
Press the button.
Press the button.
Press the button
and the button
for 3 - 5 seconds.
Press the MODE but-
ton for 3 - 5 sec-
onds.
Press the MODE but-
ton briefly.
No function
No function
The display changes to the SET‑UP menu
The display of TripDist, TripTime and AvgSpeed is reset
Next display mode
41