KTM 2008 1190 RC8 USA Owner's Manual page 115

MAINTENANCE WORK ON CHASSIS AND ENGINE
Info
The spring preload defines the initial situation of the spring process on the shock absorber.
An optimally adjusted spring preload is adapted to the rider's weight and ensures a compromise between easy handling and stabil-
ity.
–
Take the weight off the rear wheel and swingarm.
Info
The spring preload can be adjusted correctly only if the rear wheel and the
swingarm are fully relieved of weight.
–
Loosen screw
700341-10
–
Turn the adjusting ring counterclockwise with the toolset wrench until the spring is
completely relaxed.
Hook wrench (69012022000)
Extension (60012060000)
700342-01
two turns, but do not remove.

113