MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking chain wear
9.31
–
Engage neutral gear.
–
Pull the lower chain section with specified weight
Guideline
Weight, chain wear measurement
–
Measure distance
Info
Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.
Maximum distance
chain section
»
If the distance
–
Change the rear sprocket / engine sprocket, chain and chain sliding guard.
700303-01
of 18 chain links in the lower chain section.
at the longest
is greater than the specified measurement:
Info
New chains wear out faster on old, worn sprockets.
For safety reasons, the chain has no chain joint. Always have the chain
changed in an authorized KTM-RC8 workshop, where they have the nec-
essary special tools.
.
15 kg (33 lb.)
272 mm (10.71 in)
135
x