Adjusting The Rear Frame Position - KTM 2008 1190 RC8 USA Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting the rear frame position

9.76
Warning
Danger of accidents Modifications to the chassis can seriously alter the vehicle's handling characteristics.
–
Following modifications, ride slowly at first to get the feel of the new handling characteristics.
–
Remove the seat. (
–
Remove screws
700363-01
Setting a higher seat position:
–
Remove screw
–
Push the rear end down until the drill holes of the frame are level with the lower
front drill holes of the rear.
700327-10
p. 154)
with the bushings.

with washer on the left and right sides of the vehicle.

189