MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Tighten the screw.
Guideline
Screw, handlebar stub
–
Repeat the adjustments on the other handlebar stub.
–
Move the handlebar to and fro over the entire steering range.
»
If the cables restrict the freedom of movement of the steering:
–
Correct the cable routing.
700320-01
Adjusting the low position of the handlebar stubs:
–
Loosen screw
Info
Loosen the screw several turns to prevent damage to the fork lacquer when
moving the handlebar stub.
700320-11
–
Remove screw
–
Carefully shift the handlebar stub by the length of the distance sleeve.
Guideline
Long distance sleeve
–
Lay all cables between the upper triple clamp and the handlebar stub.
–
Position the distance sleeves.
700319-11
.
with distance sleeve
.
M8
20 Nm
(14.8 lbf ft)
15 mm (0.59 in)
187