MAINTENANCE WORK ON CHASSIS AND ENGINE
Fitting front wheel
x
9.44
–
Loosen screws
–
Unscrew screw
dle out of the fork stub. Remove screw
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
–
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
700272-10
fork.
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
–
Clean screw
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
200487-10
Guideline
Screw, front wheel spindle
and
.
about 6 turns, press your hand on the screw to push the wheel spin-
and wheel spindle
.
.
.
M25x1.5
45 Nm
(33.2 lbf ft)
145