KitchenAid YKDRP707RS00 Installation Instructions Manual page 6

Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm)
countertop height.
30" (76.2 cm) models 36" (91.4 cm) models
A
C _
A. 18" (45.7 cm) upper cabinet to countertop
B. 22" (55.9 cm)
C. Junction box to be located in this shaded area, see NOTE*
D. 4" (10.2 cm)
E. 20" (50.8 cm)
F. 12" (30.5 cm)
G. 5_//' (14 cm)
H. Gas line opening to be located in this shaded area
/. 3Y2" (8.9 cm)
J. 8" (20.3 cm)
K. 30_/4" (76.8 cm)
L. 4" (10.2 cm) min. clearance from both sides of range to side
wall or other combustible material
M. For minimum clearance to top of range, see NOTE**
N. 30" (76.2 cm) model: 30" (76.2 cm) min. upper cabinet width
O. 13" (33 cm) max. upper cabinet depth
*NOTE: Receptacle must be rotated 90 ° for Canadian
installation.
**NOTE: Minimum Clearances
30" (76.2 cm) models: 36" (91.4 cm) minimum clearance
When bottom of wood or metal cabinet is protected by not less
than W' (0.64 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless
steel, 0.024" (0.6 ram) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) models: 42" (106.7 cm) minimum clearance
between the top of the cooking platform and the bottom of an
unprotected wood or metal cabinet.
If installing a hood or a microwave hood combination above
the range, follow the hood instructions for dimensional
clearances above the cooktop surface.
A. 18" (45.7 cm) upper cabinet to countertop
B. 28" (71.1 cm)
C. Junction box to be located in this shaded area, see NOTE*
D. 4" (10.2cm)
E. 20" (50.8 cm)
F. 12" (30.5 cm)
G. 5F2"(14cm)
H. Gas line opening to be located in this shaded area
L 8_2" (8.9 cm)
J. 8" (20.3 cm)
K. 86_/4" (92.1 cm)
L. 4" (10.2cm) min. clearance from both sides of range to side
wall or other combustible material
M. For minimum clearance to top of range, see NOTE**
N. 36" (91.4 cm) model: 36" (91.4cm) min. upper cabinet width
O. 13" (33 cm) max. upper cabinet depth
*NOTE: Receptacle must be rotated 90 ° for Canadian
installation.
**NOTE: Minimum Clearances
36" (91.4 cm) models: 42" (106.7 cm) minimum clearance
When bottom of wood or metal cabinet is protected by not less
than _/4"(0.64 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless
steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
36" (91.4 cm) models: 48" (121.9 cm) minimum clearance
between the top of the cooking platform and the bottom of an
unprotected wood or metal cabinet.
If installing a hood or a microwave hood combination above
the range, follow the hood instructions for dimensional
clearances above the cooktop surface.