Changing/Deleting A One Touch Dial - Konica Minolta PagePro 1390 MF User Manual

To correct the entered information, press the [+] or [–] key until the cur-
sor is positioned at the information to be corrected. Then, press the [–
] key to delete a character.
A one-touch dial key can be programmed without specifying a fax
recipient's name. If this one-touch dial key is pressed when sending a
fax, the fax number is displayed.
5
Type in the fax number of the
recipient.
The fax number can contain
a maximum of 40 digits.
Entering numbers after 40 digits have already been entered for the fax
number will overwrite the number at the cursor's position.
6
Press the [Select] key to register the entered information and return to the
Fax mode screen.
Press the [Stop/Reset] key to return to the Fax mode screen without
registering the entered information.

Changing/Deleting a One Touch Dial

The registered one-touch dial information can be corrected.
1
Press the [Menu] key, the [5] key, and then the [Select] key.
2
Check that the One Touch
screen appears, and then press
the [Select] key.
3
Press the one-touch dial key to
be corrected.
4
Correct the name of the fax
recipient, and then press the
[Select] key.
To erase the information
from the one-touch dial key, erase the fax recipient's entire name and
fax number.
To cancel the changes to the one-touch dial key, press the [Cancel]
key. The One Touch screen appears again.
To correct the entered information, press the [+] or [–] key until the cur-
sor is positioned at the information to be corrected. Then, press the [–
] key to delete a character.
One-Touch Dial 41