Copy Editing Functions; Sheet / Cover Insertion - Konica Minolta 7075 Instruction Manual

Hide thumbs Also See for 7075:

Table of Contents

9. Special Functions

9.2 Copy Editing Functions

Use the functions described in this section to determine how copies or

copied sets should be completed, i.e. as a booklet or with each chapter

beginning on a right (front) page, etc.

Copied sets can be individually completed with front and back covers and

inserted sheets. Covers and inserts are fed from each tray and the multi-

sheet bypass tray.

Insert the desired paper into the tray displayed on the screen. If other

than the displayed trays are desired, use the two keys at the bottom of

the screen. The size of covers and inserted sheets has to be identical to

the size of the copied set.

Options for Sheet & Cover Insertion:

– Select the required functions by pressing the corresponding keys. All

combinations are possible, e.g.:

– Copied front and back cover, blank inserts.

– Copied front cover, blank back cover, copied inserts; etc.

– If you want to have covers of a different colour or material from

inserts, select two different trays.

Entering Insert Positions:

Altogether max. 30 inserts are possible. A selected front and back cover is

automatically indicated in the first and last position of the page setting

screen.

– Use the keypad to enter the page number of a copied insert. If you

have selected BLANK INSERT, enter the page number after which you

require a blank insert.

– Press SET to confirm. The next insert position can now be entered. If

you want to enter more than 15 insert positions, use the arrow key to

call up further page setting possibilities.

– The DELETE key deletes a wrongly entered position, which can then be

corrected.

– If you have entered all required insert positions, confirm by pressing

OK, until you have returned to the Basic Screen.

Table of Contents