Table of Contents
Advertisement
9. Special Functions
9.2.7 Booklet
Advice:
Cover with Copy sheet
If the insides of the cover
should be blank, insert a blank
page each in second and
last-but-one position of your
original set.
*
Option
Single pages are combined on the front and back of copies in such a way,
that you only need to fold the copied set in the center to have a booklet
with correct page order. Booklets can be A4 size (folded A3 copies) or A5
size (folded A4 copies).
– Select one of the functions. For a booklet with a cover, press CHANGE
OF THE COVERS TRAY, until the required tray is displayed. If Cover
with Copy Sheet is selected, the first two and the last two pages of
the original are copied onto the cover (see advice on the left).
– Make sure that Output - 1 to n, corresponding to the normal page
order of a book, is selected.
– A3 copy size is automatically selected (for a booklet in A4 size). For an
A5 size booklet, select A4 size (resp. A4R size, if the Booklet
equipped and you want to have the A5 booklet folded and/or stapled
automatically).
– 1 3 2 is automatically selected. For double-sided originals, you have to
change this to 2 3 2.
– If the Konica 7075 is equipped with the Booklet Maker*, you can select
automatic finishing of your booklets with centerfold and stapling (refer
to section 10. Finishing Options).
– Insert the originals into the RADF. If you want to position your originals
on the platen glass, press STORE in the Basic Screen and scan each
original.
Maker*
is
53
Advertisement
Table of Contents
