Table of Contents
Advertisement
9. Special Functions
Originals
8
7
6
5
4
3
2
1
6
5
4
3
2
1
The images are inserted after the
designated pages, in this case
after pages 2 and 4.
9.2.5 Combination
– Select the function; and use the keypad to enter the page numbers,
after which the images are to be inserted. If several inserts should fol-
Images
low after the same page number, enter that number as many times, i.e.
once for every insert.
– Confirm each page number by pressing SET. The last number entered
can be cancelled at any time by pressing DELETE.
– When 15 entries have been made, press the arrow key to call up a
screen in which another 15 positions can be entered.
– After entering all required page numbers, confirm by pressing OK,
8
7
until you have returned to the Basic Screen. Select other functions as
Copies
required, and set the number of copies.
– The Store mode is activated now. First position the original set in the
RADF and press START to scan. The system now prompts you to scan
the inserts via the platen glass, one after the other in the order, in
which they are to be inserted in the copied set.
– After scanning all originals, press STORE to deactivate the Store mode.
– Press START to start copying. The specified quantity of copied sets is
now automatically produced from memory.
This function lets you combine two, four or eight original images on one
page.
– Press the corresponding function key for the required combination:
2-in-1, 4-in-1 or 8-in-1. If 2-in-1 is selected the HORIZONTAL ORDER
is fixed. For 4-in-1 and 8-in-1 both the HORIZONTAL ORDER and
VERTICAL ORDER can be selected.
– If you want to copy up to 16 originals onto the front and back of a
single sheet, select 1 3 2 or 2 3 2 (for double-sided originals); now
make other required settings.
– A4 copy size is automatically selected; but you can specify another size
if required.
– Position originals in the RADF. If you want to position your originals on
the platen glass, press STORE and scan each original.
– When all originals have been scanned, deactivate the STORE mode and
start copying by pressing START.
51
Advertisement
Table of Contents
