Table of Contents
Advertisement
9. Special Functions
9.2.3 Chapter
Originals
8
7
5
4
3
6
1
2
Front pages
In this example, page 2 and page
6 are positioned on front pages.
9.2.4 Image Insert
50
When duplex copying, you can use this function to start each new chap-
ter on a right (front) page. Up to 30 positions can be specified for chapter
beginnings with page numbers up to 250. This function is only available
in combination with duplex coping 1 3 2 or 2 3 2.
Chapter can be combined with the Booklet function. Or press the Copy
Insertion key in the display, to select special (e.g. coloured) paper for the
specified pages; this paper is then fed from the selected sheet insertion
tray.
– Select the function and use the keypad to enter page numbers for front
pages. The first entry should be an even page number.
Copies
– Press SET after each entry. If you want to change an entry, press
DELETE.
– When 15 entries have been made, press the arrow key to call up a
screen in which another 15 positions can be entered.
8
6
– After entering all required page numbers, confirm by pressing OK, until
4
2
you have returned to the Basic Screen.
1
– 1 3 2 is automatically selected. For double-sided originals, change this
to 2 3 2; and make further function selections as desired.
– Position originals in the RADF. If you want to position your originals on
the platen glass, Press STORE in the Basic Screen to scan the originals.
This function serves to combine originals, which are processed via the
RADF, with pages, which cannot be fed through the RADF (e.g. photos,
pasted or thick originals). These images are scanned from the platen glass
and are automatically positioned after the specified pages in the copied
set. Up to 30 inserts are possible.
Advertisement
Table of Contents
