How To Supply Paper, Toner, Staples; Supply Paper - Konica Minolta 7075 Instruction Manual

Hide thumbs Also See for 7075:

Table of Contents

5. How to Supply Paper, Toner, Staples

Option

This section contains information regarding the system's paper trays, how

to refill toner and replace staples.

General

This Konica system is equipped with up to 4 paper trays and a multi-sheet

bypass.

Each tray selection key in the basic screen displays the filling level of the

corresponding tray. If a tray is nearly empty the filling level indicator will

flash. If a selected tray is empty, the tray key will flash.

Press the HELP key while the basic screen is displayed, to call up the basic

help screen. Pressing the soft key for any of the paper trays will display a

help screen explaining how to refill paper.

How to supply paper in trays 1 to 3:

1. Withdraw the tray from the mainbody as far as it will go.

2. If required, the guide plates can be adjusted to a different size.

3. Fan the paper before inserting it!

4. Stack paper into the tray with the curly side up. Paper must not be sta-

cked higher than the red mark.

5. Push the paper tray into the copier until it locks into place.

How to supply paper in tray 4*:

1. Open the cover of the LCT.

2. Insert the paper after fanning it thoroughly.

3. If you want to add more paper, press the green button, to release the

bottom plate of the LCT.

Multi-Sheet Bypass

The multi-sheet bypass is located on the right of the system.

Paper in sizes A3+ to A6R can be processed, as well as thick and thin

paper, OHP film and special materials (e.g. transparancies, labels, index

sheets).

1. Open the bypass tray.

2. Insert the paper and adjust the paper guides.

3. To copy onto the material inserted into the bypass tray, press the

bypass key in the basic screen.

Table of Contents