Table of Contents
Advertisement
8. Other Basic Functions
8.1.4 Special Original Size
Advice:
Select Tabpaper to copy tab-
bed originals onto tabbed sets,
including the tab information.
In this mode, only tabbed sets
can be processed.
8.2 Check Mode/Proof Copy
Advice:
The scanned originals will only
remain in the image memory
after the printing of a sample
copy, if the copy quantity set-
ting is more than 1.
Press the Non STD size key to access the screen shown above. Here you
can specify the scanning area for originals of particular sizes:
Always select a slightly lager size than your original. If you select WHOLE
AREA, the complete area of the platen glass is scanned and is copied
onto the selected paper size with the selected magnification ratio.
This screen allows to check if all required settings have been made; and in
order to check a correct copy result, you have the option to print a single
sample copy without deletion of the image memory afterwards.
– Press the CHECK key on the operating panel to call up a screen, which
displays all settings made for the copy job.
– To generate a sample set of copies, press PROOF COPY on the screen
or on the operation panel. A single set of copies will be printed.
– The screen now indicates, which previously made settings can still be
adjusted. Functions, which are darkened in the screen, cannot be chan-
ged or adjusted.
– To change a setting, press the corresponding key in the screen and then
press CHANGE SETTING. This will open another screen, in which the
changes can be made. Some functions cannot be changed but can be
deleted.
– To delete a function, press the corresponding key in the screen and
then press RELEASE SETTING. This will activate a screen, in which you
can press YES to delete the function or NO to keep the setting.
– If you do not need to make any adjustments, press START. In this case
the sample copy set will be counted for the total set quantitiy.
– If the sample copy set does not look as desired, press the STOP key on
the panel to delete the image memory and start again .
35
Advertisement
Table of Contents
