Side Panel - Comtrend Corporation CT-6382D User Manual

1.4

Side Panel

Green
USB
Green
Green
DECT
Green
Connection to USB port
Connect the USB port to a PC with a standard USB cable.
Paging Function
Once registered, you can push the PAGE button (for one second) to locate the
handset(s). To disable, simply push the PAGE button once again.
Register Function
Hold down PAGE button for 10 seconds (You can also do this using the GUI interface
by clicking on the Enable button*.) Once DECT led illuminates use your DECT
handset to register with the CT-6382D. Once the handset is registered the led will
switch off and stop registered mode. Please note that if you don't register your
handset(s) within three minutes, the register function will disable and the led will
switch off.
* Enable Register Mode
On A USB link is established
Off A USB link is not established
Blink Data transmitting or receiving over USB
On IAD is in registered mode for DECT
Off IAD is not in registered mode for DECT
Blink IAD is in paging mode for DECT
8