Dsl - Comtrend Corporation CT-6382D User Manual

6.8

DSL

To access the DSL settings, First click On Advanced Setup and then click on DSL.
The DSL Settings dialog box allows you to select an appropriate modulation mode.
Note that this means the IAD uses one of the selected modulation modes to sync
with the DSLAM if two more modes are selected.
Option
G.dmt
G.lite
T1.413
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled The device can support the functions of the ADSL2+
AnnexM Enabled
Inner Pair
Outer Pair
Bitswap Enable
SRA Enable
Description
Sets G.Dmt if you want the system to use only G.Dmt mode
Sets G.lite if you want the system to use only G.lite mode
Sets the T1.413 if you want the system to use only T1.413 mode
The device can support the functions of the ADSL2
The device can support/enhance the long loop test
The device can support/enhance the data rate of both
upstream/downstream
Reserved only
Reserved only
Allows bitswaping function
Allows seamless rate adaptation
78