Comtrend Corporation CT-6382D User Manual page 118

Emergency = system is unustable
Alert = action must be taken immediately
Critical = critical conditions
Error = Error conditions
Warning = normal but significant condition
Notice
Informational
Debugging = debug-level messages
Emergency is the most serious event level, whereas Debugging is the least
important. For instance, if the log level is set to Debugging, all the events
from the lowest Debugging level to the most critical level Emergency level
will be recorded. If the log level is set to Error, only Error and the level
above will be logged.
Display Allows the user to select the logged events and displays on the View
Level System Log page for events of this level and above to the highest
Emergency level.
Mode Allows you to specify whether events should be stored in the local memory,
or be sent to a remote syslog server, or both simultaneously.
If remote mode is selected, view system log will not be able to display
events saved in the remote syslog server.
When either Remote mode or Both mode is configured, the WEB UI will
prompt the user to enter the Server IP address and Server UDP port.
3. Click View System Log. The results are displayed as follows.
117