Table of Contents
Advertisement
2.2
Installing the USB Driver
Before you connect your VoIP IAD's USB cable to your PC, you must load the ADSL
USB drivers. The USB driver supports Windows 98, ME, 2000, and XP.
To connect the VoIP IAD to a PC using the USB interface, you need to use a standard
USB cable and install the USB interface software. Follow the steps below:
STEP 1: Connect the USB VoIP IAD to the PC by plugging the flat connector of a
standard USB cable into your PC, and plugging the square connector into
the VoIP IAD. The screen will display as below:
STEP 2: When the screen displays as below, click the Next button.
Note: This screen won't be displayed if the USB Driver has been previously
un/installed.
13
Advertisement
Table of Contents
