Comtrend Corporation CT-6382D User Manual page 51

The user must configure the IP Address and the Subnet Mask. To use the DHCP
service on the LAN, select the Enable DHCP server checkbox, and enter the Start
IP addresses, the End IP address and DHCP lease time. This configures the IAD to
automatically assign IP addresses, default gateway address and DNS server
addresses to each of your PCs.
Note that the IAD's default IP address is 192.168.1.1 and the default private
address range provided by DHCP server in the IAD is 192.168.1.2 through
192.168.1.254.
7. The WAN Setup-Summary screen presents the entire configuration summary.
Click Save/Reboot if the settings are correct. Click Back if you wish to modify the
settings.
8. The following screen will be displayed. To enable the wireless function, select the
box (by clicking on it) and input the SSID. Then, click Next.
50