Comtrend Corporation CT-6382D User Manual page 107

Caller ID
The Call Manager delivers Calling Number when placing calls. The calling number is
transmitted to the analog line for CLASS recognition.
Call Hold
To put a call on hold, press flash then hang up (optional). To return to the original
call, press flash or pick up the phone. The phone will issue a short ring burst every
30 seconds or so while on-hook to remind you that a call is on hold.
Call Transfer
To transfer a call, press flash then dial the new number.
To transfer immediately, hang up (blind transfer).
To transfer with consultation, wait for the party to answer, consult, and then hang
up.
To abort the transfer (if the third party does not answer), press flash to return to the
original call.
Conference Calling
To turn a two-party call into a three-party conference call, press flash and dial the
third party. Wait for the party to answer, then press flash.
To drop the third party and return to a two-party call, press flash again. To drop
yourself out of the conference, hang up. The call will be transferred (so that the
other two parties remain connected to each other). In conference mode, the
conference initiator performs the audio bridge/mixing function – there are only 2
voice streams established.
Call Waiting
If call waiting is enabled on a line (see feature codes), and you hear the call waiting
tone during a call, press flash to answer the second call. The first call is
automatically placed on hold. To switch between calls, press flash again.
To disable the call waiting feature, dial *60.
To enable the call waiting feature, dial *61.
Call forward feature settings (Busy or All) takes priority over the call waiting feature.
Call waiting feature is ignored on new incoming calls if there is already a call on hold
or in conference.
106