System Log - Comtrend Corporation CT-6382D User Manual

10.2 System Log

The System Log option under Management allows you to view the system events log,
or to configure the System Log options. The default setting of system log is
enabled. Follow the steps below to enable and view the system log.
1. Click Configure System Log to display the following screen.
2. Select from the desired Log options described in the following table, and then
click SAVE/Apply.
Option Description
Log Indicates whether the system is currently recording events. The user can
enable or disable event logging. By default, it is disabled. To enable it,
tick Enable and then Apply button.
Log Allows you to configure the event level and filter out unwanted events below
level this level. The events ranging from the highest critical level "Emergency"
down to this configured level will be recorded to the log buffer on the
CT-6382D SDRAM. When the log buffer is full, the newer event will wrap
up to the top of the log buffer and overwrite the old event. By default, the
log level is "Debugging," which is the lowest critical level. The following log
levels are
116