Bridging - Comtrend Corporation CT-6382D User Manual

5.2.4

Bridging

Select the bridging mode. To configure Bridging, do the following.
1. Select Quick Setup and click Next.
2. Enter the PVC Index and click Next.
3. Type in the VPI and VCI values provided by the ISP and click Next.
4. Select the Bridging radio button and click Next. The following screen appears.
To use the bridge service, tick the checkbox, Enable Bridge Service, and enter
the service name.
5. Click the Next button to continue. Enter the IP address for the LAN interface.
The default IP address is 192.168.1.1. The LAN IP interface in bridge operating
mode is needed for local users to manage the VoIP IAD. Notice that there is no
IP address for the WAN interface in bridge mode, and the remote technical
support cannot access the VoIP IAD. DHCP server is disabled on the LAN.
52