Jumpers And Connectors; Table 1.1:Jumpers; Table 1.2:Connectors - Advantech PCA-6009 User Manual

1.4 Jumpers and Connectors

Connectors on the PCA-6009 single board computer link it to external
devices such as hard disk drives and a keyboard. In addition, the board has a
number of jumpers used to configure your system for your application.
The tables below list the function of each of the board jumpers and con-
nectors. Later sections in this chapter give instructions on setting jump-
ers. Chapter 2 gives instructions for connecting external devices to your
single board computer.
Table 1.1: Jumpers
Label
J1
J2
Table 1.2: Connectors
Label
CN1
CN3
CN4
CN6
CN7
CN8
CN9
CN10
CN11
CN12
CN13
PCA-6009
User Manual
Function
CMOS Clear
Watchdog timer output selection
Function
Primary IDE connector
FDD connector, Supports 360K/1.2M/720K/1.44M
FDD x 2
Parallel port, Parallel port x 1, supports SPP/EPP/
ECP mode
USB port 0,1
VGA connector
Ethernet connector 1
Serial port: COM1; RS232 (D-sub 9-pin connector)
Serial port: COM2; RS232 (9-pin connector)
PS/2 keyboard and mouse connector
Cable length: 20 meters
External keyboard connector
Reserved
6