Advantech PCA-6009 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. PCA-6009
  6. User manual
Advantech PCA-6009 User Manual

Advantech PCA-6009 User Manual

Lga775 pentium 4 /celeron d processor card with vga/gigabit lan/hisa/ dvi (800 mhz fsb)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PCA-6009
LGA775 Pentium® 4 /
Celeron® D Processor Card
with VGA/Gigabit LAN/HISA/
DVI (800 MHz FSB)
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCA-6009 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech PCA-6009

Summary of Contents for Advantech PCA-6009

  • Page 1 PCA-6009 LGA775 Pentium® 4 / Celeron® D Processor Card with VGA/Gigabit LAN/HISA/ DVI (800 MHz FSB) User Manual...

  • Page 2: Copyright Notice

    Copyright Notice This document is copyrighted, 2006, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improve- ments to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmit- ted in any form or by any means without the prior written permission of Advantech Co., Ltd.
  • Page 3 Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern. Here is a guide to Advantech’s customer services.
  • Page 4 Table 1.1: Table 1.1: PCA-6009 Comparison Table Model PCA-6009LV PCA-6009VG VGA: Intel 915 GV integrated VGA controller onboard USB 2.0 port LAN 1: Broadcom BCM5721 10/100/ 1000Base-T Table 1.2: PCA-6009 DDR memory compatibility table Part Advan- Brand Size Speed Type...

  • Page 5: Product Warranty

    Advantech assumes no liability under the terms of this warranty as a consequence of such events. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.

  • Page 6: Initial Inspection

    It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the PCA-6009, check it for signs of shipping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.

  • Page 7: Important Safety Information

    Release Note Date Revision Description June 2006 1st Edition Initial Release Important Safety Information SAFETY INSTRUCTIONS This device complies with the requirements in part 15 of the FCC rules: Operation is sub- ject to the following two conditions: 1. This device may not cause harmful interference, and 2.

  • Page 9: Table Of Contents

    Table 1.1:Jumpers............6 Table 1.2:Connectors ............6 Board Layout: Jumper and Connector Locations....8 Figure 1.1:Jumper and Connector locations ....8 PCA-6009 Block Diagram ..........9 Figure 1.2:Block Diagram ..........9 Safety Precautions ............10 Jumper Settings ............... 11 1.8.1 How to set jumpers ............
  • Page 10 First/Second/Third Boot Device ........32 3.4.8 Boot Other Device ............32 3.4.9 Swap Floppy Drive ............32 3.4.10 Boot Up Floppy Seek............ 32 3.4.11 Boot Up NumLock Status..........32 3.4.12 Gate A20 Option............32 3.4.13 Typematic Rate Setting..........33 PCA-6009 User’s Manual...
  • Page 11 3.4.14 Typematic Rate (Chars/Sec) ......... 33 3.4.15 Typematic Delay (msec)..........33 3.4.16 Security Option ............. 33 3.4.17 APIC Mode ..............33 3.4.18 MPS Version Control For OS........33 Advanced Chipset Features..........34 Figure 3.4:Advanced chipset features screen ....34 3.5.1 DRAM Timing Selectable ..........
  • Page 12 System FAN Speed............46 3.9.6 VCORE and Other Voltages......... 46 3.9.7 Shutdown Temperature..........46 3.10 Frequency / Voltage Control ........... 46 Figure 3.12:Spread Spectrum Control screen ....46 3.10.1 CPU Clock Ratio ............46 3.10.2 Spread Spectrum ............46 PCA-6009 User’s Manual...
  • Page 13 3.11 Password Setting ............. 47 3.12 Save & Exit Setup ............47 3.13 Exit Without Saving ............47 Chapter 4 Chipset Software Install Utility.....50 Before you begin ............. 50 Introduction ..............50 Windows XP Driver Setup..........51 Chapter 5 VGA Setup ............56 Introduction ..............
  • Page 14 Table B.20:DMA channel assignments ...... 100 B.21 Interrupt Assignments ........... 100 Table B.21:Interrupt assignments ....... 100 B.22 1st MB Memory Map............ 101 Table B.22:1st MB memory map ....... 101 B.23 PCI Bus Map ..............101 Table B.23:PCI bus map..........101 PCA-6009 User’s Manual...
  • Page 15 General Information...

  • Page 16: Chapter 1 Hardware Configuration

    Chapter 1 Hardware Configuration 1.1 Introduction The PCA-6009 is designed with the Intel 915GV chipset and ICH6 (I/O controller) to support 800 MHz Front side Bus, Intel Pentium 4/Celeron D processor, high speed/high capacity dual channel DDRII 400/533 memory, and high performance I/O functions such as Gigabit Ethernet ports, Serial/Parallel ATA ports, and PCI-Express host interface for LAN.

  • Page 17: Features

    1.2 Features Supports 2 Serial-ATA devices Supports Dual Channel DDRII 400/533 SDRAM up to 2 GB Features a thermal protection circuit which will enable the proces- sor to automatically shut down when the cooling system fails Supports 10/100/1000Base-T Ethernet 4 USB 2.0 ports CMOS automatic backup and restore to prevent accidental data loss of BIOS setup data...

  • Page 18: Specifications

    PS/2 mouse. An onboard keyboard pin header connector is available. • ISA bus: Supports ISA without DMA. PCI-to-ISA bridge: ITE IT8888 • AC-97 Audio: PCA-6009 can provide audio function with the optional audio extension module PCA-AUDIO-00A1 • USB port: Supports up to four USB 2.0 ports with the one USB 2.0 cable kits included, and supports transmission rates up to 480 Mbps;...

  • Page 19: Vga Interface

    available through one 4-USB port cable kits, P/N: 1700000719 1.3.4 VGA interface • Controller: Chipset integrated VGA controller • Display memory: Dynamically shared system memory up to 128 MB. • Resolution: Up to 2048x1536@ 85 Hz refresh 1.3.5 Ethernet LAN •...

  • Page 20: Jumpers And Connectors

    1.4 Jumpers and Connectors Connectors on the PCA-6009 single board computer link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application.
  • Page 21 Table 1.2: Connectors CN16 Power LED (keyboard lock Suspend: flash flash (ATX/AT) and power LED) System On: ON (ATX/AT) System Off: OFF (AT) System OffL Slow flash (ATX) CN17 External speaker CN18 Reset connector CN19 HDD LED connector CN20 ATX feature connector CN21 ATX soft power switch (PS_ON) CN22...

  • Page 22: Board Layout: Jumper And Connector Locations

    1.5 Board Layout: Jumper and Connector Locations Figure 1.1:Jumper and Connector locations PCA-6009 User Manual...

  • Page 23: Pca-6009 Block Diagram

    1.6 PCA-6009 Block Diagram Intel Pentium 4 LGA 775 Processor DDR II 400/533 Channel A Intel 915GV GMCH DDR II 400/533 Channel B 1 ATA 100 G-LAN1 : Broadcom ports PCI-Express x1 BCM5721 2 SATA ports 150MB/s ICH6 4 USB Ports...

  • Page 24: Safety Precautions

    Notice: Before install your PCA-6009 into a chassis, make sure that all components on both sides of the CPU card do not touch any metal parts, especially the chassis wall and add-on card at the adjacent slot.

  • Page 25: Jumper Settings

    1.8.2 CMOS clear (J1) The PCA-6009 single board computer contains a jumper that can erase CMOS data and reset the system BIOS information. You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position.

  • Page 26: Watchdog Timer Output (J2)

    1.8.3 Watchdog timer output (J2) The PCA-6009 contains a watchdog timer that will reset the CPU or send a signal to IRQ11 in the event the CPU stops processing. This feature means the PCA-6009 will recover from a software failure or an EMI problem.

  • Page 27: System Memory

    1.9 System Memory The PCA-6009 has four sockets for 240-pin dual inline memory modules (DIMMs) in two separated memory channels. It can operate with single channel or dual channel modules. We recommend to use dual channel mode to provide optimized performance.

  • Page 28: Processor Installation

    To install a CPU, first turn off your system and remove its cover. Locate the pro- cessor LGA775. Warning: Advantech highy recommends attaching only the dedicated LGA775 CPU coolers, Advantech part numbers ,1750000332 or 1750000334 both of which have a high MTBF and reliability. Using...
  • Page 29 Connecting Peripherals Chapter 2...

  • Page 30: Chapter 2 Connecting Peripherals

    2.2 1st (CN1) IDE Connectors You can attach up to two IDE (Integrated Drive Electronics) drives to the PCA-6009’s built-in controller. The primary (CN1) connector can accommodate two drives. Wire number 1 on the cable is red or blue and the other wires are gray.

  • Page 31: Floppy Drive Connector (Cn3)

    2.3 Floppy Drive Connector (CN3) You can attach up to two floppy disk drives to the PCA-6009's on board controller. You can use 3.5" (720 KB, 1.44 MB) drives. The single board computer comes with a 34-pin daisy-chain drive con- nector cable.

  • Page 32: Usb Ports (Cn6,Cn63)

    1 corresponds to pin 1 of CN4. Pin 1 is on the upper right side of CN4. 2.5 USB Ports (CN6,CN63) The PCA-6009 provides up to eight ports of USB (Universal Serial Bus)interface.The USB interface complies with USB Specification Rev. 2.0 support transmission rate up to 480 Mbps and is fuse-protected. The USB interface can be disabled in the system BIOS setup.

  • Page 33: Vga Connector Cn7

    VGA. Pin assignments for CRT connector CN7 are detailed in Appendix B. 2.7 Ethernet Connector (CN24) The PCA-6009 is equipped with a high performance 1000 Base-T Ether- net interface. The Gigabit Ethernet ports uses the Broadcom BCM 5721 controller connected to the PCI-Express x1 of the ICH6 I/O controller.

  • Page 34: Serial Ports (Com1: Cn9/Cn91; Com2: Cn10 )

    2.8 Serial Ports (COM1: CN9/CN91; COM2: CN10 ) The PCA-6009 offers two serial ports, CN9 as COM1 and CN10 as COM2. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network.

  • Page 35: External Keyboard Connector (Cn12)

    2.10 External Keyboard Connector (CN12) In addition to the PS/2 mouse/keyboard connector on the PCA-6009's rear plate, there is also an extra onboard external keyboard connector. This gives system integrators greater flexibility in designing their sys- tems. 2.11 CPU Fan Connector (CN68) The PCA-6009 provides 4 pin CPU fan connector.

  • Page 36: Front Panel Connectors (Cn16, 17, 18, 19)

    2.12 Front Panel Connectors (CN16, 17, 18, 19) There are several external switches to monitor and control the PCA-6009 2.12.1 Power LED (CN16) CN16 is a 5-pin connector for the power on LED. Refer to Appendix B for detailed information on the pin assignments. If a PS/2 or ATX power supply is used, the system's power LED status will be as indicated below: Table 2.1: PS/2 or ATX power supply LED status...

  • Page 37: Reset (Cn18)

    2.12.3 Reset (CN18) Many computer cases offer the convenience of a reset button. Connect the wire for the reset button. 2.12.4 HDD LED (CN19) You can connect an LED to connector CN19 to indicate when the HDD is active. 2.12.5 ATX soft power switch (CN21) If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to CN21.

  • Page 38: Atx Feature Connector (Cn20)

    2.13 ATX Feature Connector (CN20) Connect to the CN1 on the Advantech backplane to enable the ATX func- tion, 5V stand-by. 2.14 AC-97 Audio Interface (CN43) The PCA-6009 provides AC-97 audio through PCA-AUDIO-00A1 module from Advantech. PCA-6009 User Manual...

  • Page 39: Serial Ata Interface (Sata0 And Sata2)

    2.15 Serial ATA Interface (SATA0 and SATA2) In addition to the one EIDE interfaces (up to two devices), the PCA-6009 provides two high performance serial ATA interfaces (up to 150MB/s) which eases cabling to hard drives with thin and long cables.

  • Page 40: Front Panel Lan Indicator Connector (Cn65)

    LAN LED to the CN65 connector to indicate the LAN operating status. The indication of the front LAN LED is same as the indication of the RJ45 on the rear plate. PCA-6009 User Manual...
  • Page 41 Award BIOS Setup Chapter 3...

  • Page 42: Chapter 3 Award Bios Setup

    "CMOS checksum error..." display screen mes- sage appearing. Then enter the "Setup" screen to modify the data. If the "CMOS checksum error..."message appears again and again, please check to see if you need to replace the battery in your system. PCA-6009 User Manual...

  • Page 43: Entering Setup

    3.2 Entering Setup Turn on the computer and press <Del> to enter the BIOS setup. Figure 3.1: Award BIOS Setup initial screen 3.3 Standard CMOS Setup 3.3.1 Date The date format is <week>, <month>, <day>, <year>. 3.3.2 Time The times format in <hour> <minute> <second>, based on the 24-hour military time clock.

  • Page 44: Drive A / Drive B

    The options are: No Errors/All Errors/All, But Keyboard/All, But Dis- kette/All, But Disk/Key 3.3.6 Memory The category displays base memory, extended memory and total memory detected during POST (Power On Self Test). Figure 3.2: Standard CMOS Features Screen PCA-6009 User Manual...

  • Page 45: Advanced Bios Features

    The “Advanced BIOS Features” screen appears when choosing the “Advanced BIOS Features” item from the “Initial Setup Screen” menu. It allows the user to configure the PCA-6009 according to his particular requirements. Below are some major items that are provided in the Advanced BIOS Features screen.

  • Page 46: Hard Disk Boot Priority

    3.4.11 Boot Up NumLock Status Set the boot up status Num Lock, the options are "On" and "Off". 3.4.12 Gate A20 Option "Normal": A pin in the keyboard controller controls GateA20. Fast" (Default): Lets chipset control GateA20. PCA-6009 User Manual...

  • Page 47: Typematic Rate Setting

    3.4.13 Typematic Rate Setting The typematic rate is the rate key strokes repeat as determined by the key- board controller. The commands are “Enabled” or “Disabled.” Enabling allows the typematic rate and delay to be selected. 3.4.14 Typematic Rate (Chars/Sec) BIOS accepts the following input values (characters/second) for type- matic rate: 6, 8, 10, 12, 15, 20, 24, 30.

  • Page 48: Advanced Chipset Features

    By choosing the “Advanced Chipset Features” option from the “Initial Setup Screen” menu, the screen below will be displayed. This sample screen contains the manufacturer’s default values for the PCA-6009, as shown in Figure 3-4: Figure 3.4: Advanced chipset features screen...

  • Page 49: Dram Ras# To Cas# Delay

    3.5.3 DRAM RAS# to CAS# Delay When the DRAM Timing selectable is set to [Manual], this field is adjust- able. When DRAM is refreshed, the rows and columns are addressed sep- arately. This setup item allows user to determine the timing of the transition from RAS (row address strobe) to CAS (column address strobe).

  • Page 50: Pci-Express Root Port Func

    Specify the size of system memory to allocate for video memory. 3.5.14 DVMT Memory Size Specify the size of DVMT memory to allocate for video memory. 3.5.15 Init Display First Choose the first display interface to initiate while booting. The choice is "PCI Slot" or "Onboard." PCA-6009 User Manual...

  • Page 51: Integrated Peripherals

    3.6 Integrated Peripherals Figure 3.5: Integrated peripherals Figure 3.6: On-Chip IDE Device 3.6.1 IDE HDD Block Mode If your IDE hard drive supports block mode select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.

  • Page 52: On-Chip Ide Device

    3.6.7 SATA Port This feature allows users to view the SATA port setting. Because the PCA-6009 supports two SATA ports, SATA1 and SATA3, this option will force PATA Mode to Secondary, and display “P0, P2 Secondary”. This configuration is dependent on the chipset datasheet.

  • Page 53: Figure 3.7:Onboard Device

    Figure 3.7: Onboard Device 3.6.8 USB Controller Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have USB peripherals. The choices: "Enabled," "Dis- abled." 3.6.9 USB 2.0 Controller This entry is to disable/enable the USB 2.0 controller only. The BIOS itself may/may not have high-speed USB support.

  • Page 54: Figure 3.8:Super I/O Device

    This item allows you to select UART mode. The choices: "IrDA", "ASKIR", "Normal". 3.6.18 RxD, TxD Active This item allows you to determine the active of RxD, TxD. The Choices: “Hi, Hi,” “Lo, Lo,” “Lo, Hi,” “Hi, Lo.” PCA-6009 User Manual...

  • Page 55: Ir Transmission Delay

    3.6.19 IR Transmission Delay This item allows you to enable/disable IR transmission delay. The choices: "Enabled", "Disabled". 3.6.20 UR2 Duplex Mode This item allows you to select the IR half/full duplex function. The choices: "Half", "Full.” 3.6.21 Use IR Pins The Choice : "RxD2, TxD2", "IR-Rx2Tx2".

  • Page 56: Figure 3.9:Power Management Setup Screen (1)

    Figure 3.9: Power management setup screen (1) 3.7.1 Power Supply Type PCA-6009 can support both "ATX" and "AT" power supply. Customers can choose the PSU type through this selection. The choices are: "ATX","AT". While selecting "AT", the ACPI function will disable auto- matically.

  • Page 57: Video Off Method

    3.7.4 Video Off Method Use this to select the method to turn off the video. The choices are : "Blank Screen", "V/H SYNC+ Blank", "DPMS". 3.7.5 Video Off In Suspend When the system is in suspend mode, the video will turn off. The choices are "No"...

  • Page 58: Fdd, Com, Lpt Port

    Data (ESCD) if you have installed a new add-on, and system config- uration has caused such a conflict that OS cannot boot. 3.8.2 Resources Controlled By The commands here are "Auto(ESCD)" or “Manual.” Choosing “Man- ual” requires you to choose resources from each following sub-menu. PCA-6009 User Manual...

  • Page 59: Pci/Vga Palette Snoop

    "Auto(ESCD)" automatically configures all of the boot and Plug and Play devices, but you must be using Windows 95 or above. 3.8.3 PCI/VGA Palette Snoop This is set to “Disabled” by default. 3.8.4 Maximum Payload Size It allows you to set the maximum TLP payload size for the PCI Express devices.

  • Page 60: System Fan Speed

    CPU generates so that the spikes are reduced to flatter curves. It achieves this by varying the frequency slightly so that the signal does not use any particular frequency for more than a moment. The choices are: "Dis- abled," and “Enabled.” PCA-6009 User Manual...

  • Page 61: Password Setting

    3.11 Password Setting To change the password: Choose the “Set Password” option from the “Initial Setup Screen” menu and press <Enter>. The screen will display the following message: Please Enter Your Password Press <Enter>. If the CMOS is good or if this option has been used to change the default password, the user is asked for the password stored in the CMOS.
  • Page 63 Chipset Software Installation Utility Chapter 4...

  • Page 64: Chapter 4 Chipset Software Install Utility

    To facilitate the installation of the enhanced display device drivers and utility software, you should read the instructions in this chapter carefully before you attempt installation. The device drivers for the PCA-6009 board are located on the software installation CD. The auto-run function of the driver CD will guide and link you to the utilities and device drivers under a Windows system.

  • Page 65: Windows Xp Driver Setup

    Note: This utility is used for the following versions of Windows system, and it has to be installed before installing all the other drivers: Windows 2000 Windows XP 4.3 Windows XP Driver Setup Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears.
  • Page 66 Click "Next" when you see the following message. Click "Yes" when you see the following message. PCA-6009 User Manual...
  • Page 67 Click "Next" when you see the following message. When the following message appears, click "Finish" to complete the installation and restart Windows. Chapter 4...
  • Page 69 VGA Setup Chapter 5...

  • Page 70: Chapter 5 Vga Setup

    3D support deliver an intense and realistic visual experience without requiring a separate graphics card. • Intel Serial Digital Video Output (SDVO): The PCA-6009 provides DVI interface through SDVO ports. It supports CRTs via a VGA con- nector with a maximum pixel lock of 400 MHz (up to 2048x1536 reso-...

  • Page 71: Windows Xp Driver Setup

    5.2 Windows XP Driver Setup Note: Before installing this driver, make sure the CSI utility has been installed in your system. See Chapter 4 for information on installing the CSI utility Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure.
  • Page 72 Please click on "Next" to continue the installation You will see a welcome window. Please chick on "Yes" to continue the installation. PCA-6009 User Manual...
  • Page 73 Click "Finish" to complete the installation and restart the computer now or later. Chapter 5...
  • Page 75 LAN Configuration Chapter 6...

  • Page 76: Chapter 6 Lan Configuration

    Chapter 6 LAN Configuration 6.1 Introduction The PCA-6009 features single/dual Gigabit Ethernet network interface. With the Broadcom BCM5721 GbE controller designed-in, PCA-6009 implements the PCI Express host interface (PCI-E X1) in LAN connec- tion with the maximum throughput of 2Gbps for heavy-duty industrial network application.

  • Page 77: Win Xp Driver Setup (Broadcom Bcm5721)

    6.4 Win XP Driver Setup (Broadcom BCM5721) Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Under the "LAN Drivers" heading, click on the "Manual" to open file manager, then click "SETUP.EXE" to run the installation procedure.
  • Page 78 You will see the license agreement. Please click on "next" to con- tinue the installation. Click "Install" to continue. PCA-6009 User Manual...
  • Page 79 Click "Finish" to complete the installation. Chapter 6...
  • Page 81 USB 2.0 Configuration Chapter 7...

  • Page 82: Chapter 7 Usb 2.0 Configuration

    Chapter 7 USB 2.0 Configuration 7.1 Introduction The PCA-6009 is designed with Intel ICH6 which supports both USB1.1 and USB 2.0 high-speed transmission. It remains compatible with today's USB device. High-speed USB 2.0 provides data transfer up to 480Mb/s which is 40 times faster than USB 1.1. It is ideal for today's speed- demanding I/O peripherals.
  • Page 83 Onboard Security Setup Chapter 8...

  • Page 84: Chapter 8 Onboard Security Setup

    Chapter 8 Onboard Security Setup 8.1 Introduction The PCA-6009's hardware monitor is designed with Winbond W83627HG. Onboard security (OBS) functions monitor key hardware. They help you maintain your system's stability and durability. The PCA- 6009 can monitor 5 sets of system positive voltages, 2 sets of system neg- ative voltages, CPU cooling fan speed, and CPU temperature.

  • Page 85: Windows Xp Driver Setup

    8.2 Windows XP Driver Setup Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Click on the "Install" button under the "OBS DRIVERS" heading. Click "Next"...
  • Page 86 Click "Next" when you see the following message. Click "Next" when you see the following message. PCA-6009 User Manual...
  • Page 87 Click "Finish" to complete the installation Click "Finish" when you see the following message. Chapter 8...

  • Page 88: Using The Obs Hardware Doctor Utility

    From the desktop of Windows, click on "Start" and select "Pro- gram,” select "Winbond HWDoctor" and click "HWDOCTOR." It is recommended that you load the default values for all the OBS settings. However, if desired, you can establish new conditions for voltage, fan speed, and temperature. PCA-6009 User Manual...
  • Page 89 Chapter 8...
  • Page 91 Programming the Watchdog Timer Appendix A...

  • Page 92: Appendix A Programming The Watchdog

    Appendix A Programming the watchdog A.1 Programming the Watchdog Timer The PCA-6009's watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function after the programmed period. This section describes the operation of the watchdog timer and how to program it.
  • Page 93 Unlock W83627H Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog time Lock W83627HG Appendix A...

  • Page 94: Table A.1:Watchdog Timer Registers

    (hex). This number decides how long the watchdog timer waits for strobe before generating an inter- rupt or reset signal. Writing a new value to this register can reset the timer to count with the new value. PCA-6009 User Manual...

  • Page 95: Example Program

    F7 (hex) read/write Bit 6: Write 1 to enable key- board to reset the timer, 0 to disable.[default] Bit 5: Write 1 to generate a timeout signal immediately and automatically return to 0. [default=0] Bit 4: Read status of watch- dog timer, 1 means timer is ""time out""."...
  • Page 96 Out dx,al Enable watchdog timer and set 5 minutes as timeout interval ;----------------------------------------------------------- Mov dx,2eh ; unlock W83627H Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Mov al,08h PCA-6009 User Manual...
  • Page 97 Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Set minute as counting unit Mov al,0f5h Out dx,al al,dx Or al,08h Out dx,al ;----------------------------------------------------------- Dec dx ;...
  • Page 98 ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al al,dx Or al,80h Out dx,al ;----------------------------------------------------------- Dec dx ; lock W83627HG Mov al,0aah Out dx,al Enable watchdog timer to be reset by keyboard ;----------------------------------------------------------- Mov dx,2eh ; unlock W83627H Mov al,87h PCA-6009 User Manual...
  • Page 99 Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ;...
  • Page 100 Out dx,al ;----------------------------------------------------------- Dec dx ; Generate a time-out signal Mov al,0f7h Out dx,al ;Write 1 to bit 5 of F7 register al,dx Or al,20h Out dx,al ;----------------------------------------------------------- Dec dx ; lock W83627HG Mov al,0aah Out dx,al PCA-6009 User Manual...
  • Page 101 I/O Pin Assignments Appendix B...

  • Page 102: Appendix B Pin Assignments

    SIGNAL GND DISK DMA REQUEST IO WRITE IO READ IO CHANNEL READY CSEL HDACKO* IRQ14 IDSC16- ADDR 1 PDIAG ADDR 0 ADDR 2 HARD DISK SELECT 0* 38 HARD DISK SELECT 1* IDE ACTIVE* * low active PCA-6009 User Manual...

  • Page 103: Floppy Drive Connector (Cn3)

    B.2 Floppy Drive Connector (CN3) Table B.2: Floppy drive connector (CN3) Signal Signal FDHDIN* FDEDIN* INDEX* MOTOR 0* DRIVE SELECT 1* DRIVE SELECT 0* MOTOR 1* DIRECTION* STEP* WRITE DATA* WRITE GATE* TRACK 0* WRITE PROTECT* READ DATA* HEAD SELECT* DISK CHANGE* * low active Appendix B...

  • Page 104: Parallel Port Connector (Cn4)

    B.3 Parallel Port Connector (CN4) Table B.3: Parallel port connector (CN4) Signal Signal STROBE* AUTOFD* INIT* SLCTINI* ACK* BUSY SLCT * low active PCA-6009 User Manual...

  • Page 105: Usb Connector (Cn6, Cn63)

    B.4 USB Connector (CN6, CN63) Table B.4: USB1/USB2 connector (CN6) USB1 Signal USB2 Signal +5 V +5 V Chassis GND N/CA B.5 VGA Connector (CN7) Table B.5: VGA connector (CN7) Signal Signal GREEN BLUE H-SYNC V-SYNC Appendix B...

  • Page 106: Com1/Com2 Rs-232 Serial Port (Cn9/Cn10)

    B.6 COM1/COM2 RS-232 Serial Port (CN9/CN10) Table B.6: COM1/2 Serial Port (CN9/CN10) Signal PCA-6009 User Manual...

  • Page 107: Keyboard And Mouse Connector (Cn11)

    B.7 Keyboard and Mouse Connector (CN11) Table B.7: Keyboard and mouse connector (CN11) Signal KB DATA MS DATA KB CLOCK MS CLOCK B.8 External Keyboard Connector (CN68) Table B.8: External keyboard connector (CN12) Signal DATA Appendix B...

  • Page 108: Cpu Fan Power Connector (Cn14)

    You can use an LED to indicate when the single board computer is on. Pin 1 of CN16 supplies the LED's power, and Pin 3 is the ground. Table B.10: Power LED and keylock conn (CN16) Function LED power (+5 V) PCA-6009 User Manual...

  • Page 109: External Speaker Connector (Cn17)

    B.11 External Speaker Connector (CN17) The single board computer has its own buzzer. You can also connect it to the external speaker on your computer chassis. Table B.11: External Speaker Connector (CN17) Function Internal buzzer Internal buzzer Speaker out B.12 Reset Connector (CN18) Table B.12: Reset connector (CN18) Signal RESET...

  • Page 110: Hdd Led Connector (Cn19)

    B.13 HDD LED Connector (CN19) Table B.13: HDD LED connector (CN19) Signal VCC (LED+) IDE LED (LED-) B.14 ATX Feature Connector (CN20) Table B.14: ATX feature connector (CN20) Signal PS-ON VCCSB PCA-6009 User Manual...

  • Page 111: Atx Soft Power Switch (Cn21)

    B.15 ATX Soft Power Switch (CN21) Table B.15: ATX soft power switch (CN21) Signal 5VSB PWR-BTN B.16 H/W Monitor Alarm (CN22) Table B.16: H/W monitor alarm (CN22) Signal Enable OBS alarm Disable OBS alarm Appendix B...

  • Page 112: Audio Interface (Cn43)

    8 AC-RST 9 +12V 10 GND 11 GND 12 N/C B.18 Front Panel LAN Indicator connector (CN65) Table B.18: Front Panel LAN Indicator connector (CN65) Signal Signal LAN1_LINK N/C LAN2_LINK1000 LAN2_LINK N/C LAN1_LINK100 LAN1_ACT LAN2_LINK100 LAN2_ACT 3VDUAL LAN1_LINK1000 PCA-6009 User Manual...

  • Page 113: System I/O Ports

    B.19 System I/O Ports Table B.19: System I/O ports Addr. range (Hex) Device 000-01F DMA controller 020-021 Interrupt controller 1, master 022-023 Chipset address 040-05F 8254 timer 060-06F 8042 (keyboard controller) 070-07F Real-time clock, non-maskable interrupt (NMI) mask 080-09F DMA page register 0A0-0BF Interrupt controller 2 0C0-0DF...

  • Page 114: Dma Channel Assignments

    Interrupt from controller 2 (cascade) IRQ8 Real-time clock IRQ9 Cascaded to INT 0A (IRQ 2) IRQ10 Available IRQ11 Available IRQ12 PS/2 mouse IRQ13 INT from co-processor IRQ14 Primary IDE Channel IRQ15 Secondary IDE Channel IRQ3 Serial communication port 2 PCA-6009 User Manual...

  • Page 115: 1St Mb Memory Map

    IRQ4 Serial communication port 1 IRQ5 Parallel port 2 IRQ6 Diskette controller (FDC) IRQ7 Parallel port 1 (print port) B.22 1st MB Memory Map Table B.22: 1st MB memory map Addr. range (Hex) Device E0000h - FFFFFh BIOS CC000h - DFFFFh Unused C0000h - CBFFFh VGA BIOS...

This manual is also suitable for:

Pca-6009lvPca-6009vg

Table of Contents