Extending The Server From The Rack - HP Integrity rx2800 i4 User Manual

For more information about Telco rack solutions, see the HP infrastructure website
h18004.www1.hp.com/products/servers/platforms/rackandpower.html).
Power off the server
If you must remove a server from a rack or a non-hot-plug component from a server, power
off the server.
Remove the server from the rack
If the rack environment, cabling configuration, or the server location in the rack creates
awkward conditions, remove the server from the rack.

Extending the server from the rack

1. Pull down the quick release levers on each side of the server.
2. Extend the server from the rack.
WARNING!
rack is adequately stabilized before extending a component from the rack.
HP Confidential
("Powering off the server" (page
("Removing the server from the rack" (page
To reduce the risk of personal injury or equipment damage, be sure that the
99)).
Preparation procedures
(http://
99)).
95