Setting up the PCL driver
Stapling
Multiple-page documents can be stapled.
The staple function is available only when optional finisher is installed.
1
Click the Setup tab.
2
Select the "Staple" check box.
3
From the drop-down list, specify the number of staples and the
stapling position.
Note
Depending on the selected Binding Position setting, different stapling
positions are available.
Hole punching
Holes can be punched into the printed document.
The hole punch function is available only when punch unit is installed on
optional finisher.
1
Click the Setup tab.
2
Select the "Hole-Punch" check box.
3
From the drop-down list, specify the number of punched holes.
Center Staple and Fold
You can fold and staple printouts in half.
1
Click the Setup tab.
2
Select the "Center Staple and Fold" check box.
Note
The Center Staple and Fold function is only available when the optional
finisher and saddle kit are installed.
VarioLink 2221/2821/3621
6
6-13