Oce VarioLink 2221 User Manual page 348

11
Item
4-In-1 Copy Order
Default
Quali-
ty/Density
Modes
Default
Copy
Density
Levels
Print Exposure
Default
Finishing
Mode
Note
The staple function is displayed only when optional finisher is installed.
The hole punching function is displayed only when punch unit is installed.
11-54
Description
Specify the page order when the 4-in-1 combination function is
used.
Density Specify the default settings of the copy density.
Quality Specify the default settings of the copy quality.
Type
For Auto Specify the auto default settings of the copy density.
Mode
For Manual Specify the manual default settings of the copy density.
Mode
Specify the print density.
Output Specify the offset default setting.
Mode
(Sort)
Output Specify the staple default setting.
Mode
(Staple)
Output Specify the hole punching default setting.
Mode
(Punch)
Various settings
VarioLink 2221/2821/3621