Printer Specific Options (Finishing Options 1 To 3) - Oce VarioLink 2221 User Manual

9

Printer specific options (finishing options 1 to 3)

You can specify printer-specific options. You can specify these options
when using the staple or hole punch functions of this machine.
1
From the "File" menu, select "Print".
2
Select "Finishing Options 1 to 3".
3
Specify settings for the following:
– Offset: Specifies offset.
– Output Tray: Selects the output tray.
– Binding Position: Specifies the binding position.
– Duplex: Performs duplex printing.
– Combination: Specifies booklet printing.
– Staple: Performs stapling.
– Hole-Punch: Performs hole punching.
– Center Staple and Fold: Folds the printouts in half and staples.
– Front Cover Page: Attaches a front cover page.
– Back Cover Page: Attaches a back cover page.
– Paper Tray (Cover Page): Selects the input tray for the front cover
page and back cover page.
– Transparency Interleave: Inserts interleaves between overhead
projector transparencies.
– Paper Tray (Transparency Interleave): Selects the input tray for the
transparency interleaves.
– Wait Mode: Stops printing temporarily after part of the document
has been printed so that the proof print can be checked.
– Resolution: Specifies the resolution.
9-12
Setting up the PPD driver (Mac OS 9.2)
VarioLink 2221/2821/3621