Specifying A Custom Size - Oce VarioLink 2221 User Manual

8

Specifying a custom size

When printing on paper of a custom size, you can select a preregistered
custom paper size or specify a paper size value as described below.
1
From the "Original Size" or the "Paper Size" drop-down list, select
"Custom Size".
The Custom Size Settings dialog box appears.
2
Specify settings for the following:
– Width: Specifies the width of the custom paper size according to
the selected measurement unit.
– Length: Specifies the length of the custom paper size according to
the selected measurement unit.
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
Note
For custom sizes that are used often, it comes in handy if you add them
to the paper size list. Add a custom paper size from the Settings tab. For
details, refer to "Specifying the Settings tab settings" on page 8-41.
The "Save Custom Size" function is only available with the Windows
Vista/Server 2008 PCL driver (VXL).
8-10
Setting up the VXL/VPS driver (Windows Vista/Server 2008)
VarioLink 2221/2821/3621