Installation Of The Steam Conveyance Tubing - Carel heaterSteam User Manual

Refer to the layout and the distances between the distributor and the walls of the duct and/or between two distributors as shown
in the following drawings.
Fig. 8.5.1
200
Fig. 8.5.3
200
200
Fig. 8.5.6
min200
=
=
Fig. 8.5.8

8.6 Installation of the steam conveyance tubing

The connection between the humidifier and distributor must be made using suitable tubing, such as the Carel flexible tubing.
The use of incorrect tubing may lead to fragility and cracks and
consequent steam leaks.
The shape of the tubing must be such as to avoid the accumulation of
condensation and consequent noise (in the form of gurgling) and loss of
efficiency; the course of the tubing must exploit gravity to drain the re-
condensed steam back to the boiler or the distributor.
Avoid the formation of pockets or traps where condensation may form;
furthermore, ensure that the tubing is not choked due to tight bends or
twisting (see Fig. 8.6.1).
Fasten the ends of the tubing to the connections on the humidifier and
the steam distributor using screw clamps, so that they do not come loose
as a result of the temperature.
Carel code +030221761
70
H>250
1
H
/
200
3
H>500
2
2
1
H>200
=
1
H
2
=
Fig. 8.5.9
min 200
Fig. 8.5.2
H>350
2
H
5
1
H
5
Fig. 8.5.4
H
7
H
7
H
7
Fig. 8.5.7
=
=
=
=
Fig. 8.5.10
27
H>250
1
H
3
Fig. 8.5.5
H>300
=
1
H
3
1
H
3
=
Fig. 8.5.11
NO
NO
Fig. 8.6.1
preliminary version - rel. 2.0 - 03/09/99
heaterSteam
H>400
2
H
5
1
H
5
H>600
2
H
7
2
H
7
1
H
7
H>500