Download Print this page

Connecting The Ac Adaptor For Cradle-Type Battery Charger - Casio DT-X11 Series User Manual

Handheld terminal
Hide thumbs

Advertisement

Connecting the AC Adaptor for Cradle-type Battery Charger

Use the special AC adaptor for the Cradle-type Battery Charger to connect to a wall
outlet.
1. After making sure that the Cradle-type Battery Charger power switch is turned off,
plug the AC adaptor into the AC adaptor jack on the back of the charger.
2. Next, plug the AC adaptor into a power outlet.
3. Turn on the power. This causes the Cradle-type Battery Charger power indicator lamp
to light in red.
4. Making sure that their power contacts come into contact with each other, place the
Handheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle-
type Battery Charger power indicator lamp to light in green.
When charging is initiated, indicator 2 on the DT-X11 lights up in red. When
charging has been completed, indicator 2 on the DT-X11 changes color from red to
green.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
Shorting the power contacts can damage the Cradle-type Battery Charger.
E-48
Power switch (OFF)
Power contacts
POWER
Power Indicator Lamp
Power switch (ON)

Advertisement

loading

  Related Manuals for Casio DT-X11 Series