Download Print this page

Bluetooth Communication - Casio DT-X11 Series User Manual

Handheld terminal
Hide thumbs

Advertisement

Table of Contents
®
Bluetooth
Communication
®
Bluetooth
protocol can also be used to transfer data between two Handheld Terminals.
With Bluetooth
meters (9
'10
them.
Important!
Observe the following precautions to help ensure that data communication is
successful.
• Make sure the Bluetooth
each other. Surroundings (obstacles) may require a shorter distance between the
two devices.
• Make sure there is at least two meters (6'
devices (electrical appliances, audio-visual equipment, OA equipment, and
digital cordless telephones, facsimile machines, etc.). (Take special care with
microwave ovens. Allow at least three meters (9' 10
devices and a microwave oven.) When approaching such a device when its
power is turned on, proper data communication may prove impossible while this
may also cause interference with TV and radio reception (images produced by
certain UHF and broadcast satellite channels may become blurry).
• Normal data communication may not be possible in an area near a broadcast
transmitter or wireless transmitter. If this happens, move to a different location.
Normal data communication may not be possible in areas exposed to strong
radio waves.
• Wireless LAN Interference
Because Bluetooth
radio interference can occur if there is a Wireless LAN device nearby. This can
result in lower data communication speeds, or even make it impossible to
establish a connection. If this happens, try the following countermeasures.
• Move at least 10 meters (32
• If you cannot keep the distance at least 10 meters (32
Handheld Terminal and a Wireless LAN device, turn off the power of either the
Handheld terminal or the Wireless LAN device.
• Set the Wireless LAN mode of the Handheld Terminal to off.
E-32
®
the two Handheld Terminals should be located within about three
1
"
) from each other, as long as there is nothing blocking the path between
8
®
devices are located within three meters (9
®
and Wireless LAN use the same frequency band (2.4GHz),
3 3 3 3 3
⁄ ⁄ ⁄ ⁄ ⁄
") between this device and other
6
4 4 4 4 4
11
) away from the Wireless LAN device.
' 9
"
16
'10
1 1 1 1 1
) between communicating
⁄ ⁄ ⁄ ⁄ ⁄
"
8 8 8 8 8
11
) or more between the
' 9
"
16
1 1 1 1 1
) of
⁄ ⁄ ⁄ ⁄ ⁄
"
8 8 8 8 8

Advertisement

Table of Contents
loading

  Related Manuals for Casio DT-X11 Series