Download Print this page

Using The Laser Scanner (Laser Scanner Models Only - Casio DT-X11 Series User Manual

Handheld terminal
Hide thumbs

Advertisement

Table of Contents

Using the Laser Scanner (Laser Scanner models only)

1. After turning on the power, position the laser scanner close to a bar code and then
press the trigger key.
2. The laser emits light and scans the bar code. If scanning is completed normally,
Indicator 1 displays a green light and the buzzer sounds. If the bar code was not
scanned properly, Indicator 1 indicates a red light.
Important!
• If you are unable to scan a bar code, try changing the angle at which the scanner
is held or distance from the scanner to the bar code, and then try scanning
again.
• This Handheld Terminal is capable of scanning bar codes at a distance of
about 40-300 mm (1
scanning is possible may vary according to the bar code symbology.
• The laser scanner models are not available in the USA and Canada.
9
13
/
"-11
/
"). Furthermore, the distance at which
16
16
E-29

Advertisement

Table of Contents
loading

  Related Manuals for Casio DT-X11 Series