Before Getting Started
Be sure to perform the following steps before trying to use the Handheld Terminal for
the first time.
1. When unpacking, make sure that everything is included.
Open the box and make sure that all the items shown here are included.
Large-capacity battery pack
PC Card Remover (2 pcs)
2. Charge the battery pack.
Charge the separately available battery pack (HA-A20BAT or DT-5025LBAT). You
can use the Dual Battery Charger, or the Cradle-type Battery Charger, or the Bridge
Satellite Cradle to charge a battery pack.
For information using these options for charging, see pages 37, 46, and 50.
3. Load the battery pack into the Handheld Terminal.
1 Slide the two battery pack lock switches at the right and left sides to the "FREE"
position, and then remove the battery pack cover.
User's Guide (this manual)