Download Print this page

Configuring Handheld Terminal Settings; Calibrating Touch Screen Alignment - Casio DT-X11 Series User Manual

Handheld terminal
Hide thumbs


Table of Contents

Configuring Handheld Terminal Settings

Calibrating Touch Screen Alignment

Whenever you feel that touch screen response is poor or that the operations being
executed do not match the location you are tapping on the touch screen, perform either
of the following operations to calibrate the alignment of the touch screen.
• Press the "Fn" key and then press the "4" key after confirming that "F" is displayed
in the lower right corner of the screen.
* The following screen can also be displayed by consecutively tapping "Stylus" on the
control panel.
• Press the stylus against the center of the target mark (+ mark) as indicated on the
screen. The screen shown below appears after you press stylus against the target at
five different locations.
• Press the Execute key or tap anywhere on the touch screen.


Table of Contents

  Related Manuals for Casio DT-X11 Series