Bluetooth Communication - Casio DT-X30 Series User Manual

®
Bluetooth Communication
®
Bluetooth interface can also be used to transfer data between two Handheld Terminals.
With Bluetooth
(9 ) from each other, as long as there is nothing blocking the path between them.
'10 "
Important!
Observe the following precautions to help ensure that Bluetooth communication is
successful.
Make sure two Handheld Terminals face each other within three meters (9
Surroundings (obstacles) between the Handheld Terminals may cause a shorter
distance.
Make sure there is at least two meters (6'7") between the Handheld Terminal and
other equipment (electrical appliances, audio-visual equipment, OA equipment,
and digital cordless telephones, facsimile machines, etc.). (Take special care with
microwave ovens. Allow at least three meters (9'10 ) between the Handheld
Terminals in wireless operation and a microwave oven.) When approaching such a
device when its power is turned on, proper communication may prove impossible
while this may also cause interference with TV and radio reception (images
produced by certain UHF and broadcast satellite channels may become blurry).
Normal communication may not be possible in an area near a broadcast trans-
mitter or wireless transmitter. If this happens, move the Handheld Terminal to a
different location. Normal communication may not be possible in areas exposed
to strong radio waves.
RF Wireless LAN Interference
Because Bluetooth
(2.4GHz), radio interference can occur if there is a wireless LAN device nearby.
This can result in lower communication speeds, or even make it impossible to
establish a connection. If this happens, try the following countermeasures.
Move at least 10 meters (32
If you cannot keep the distance at least 10 meters (32
Handheld Terminal and a wireless LAN device, turn off the power of either the
Handheld Terminal or the wireless LAN device.
Although the Handheld Terminal enables wireless LAN and Bluetooth
communication to be used simultaneously as a result of being equipped with
Bluetooth
surrounding radio wave environment.
®
the two Handheld Terminals should be located within about three meters
®
and RF wireless LAN use the same frequency band
'10 "
®
Ver.2.0, communication may not be possible depending on the
) away from the wireless LAN device.
'10 " ) or more between the
®
'10 " ).
E-31