Configuring Handheld Terminal Settings; Calibrating Touch Screen Alignment - Casio IT-600 Series User Manual

Handheld terminal
Hide thumbs Also See for IT-600 Series:
Table of Contents

Advertisement

Configuring Handheld Terminal Settings

Calibrating Touch Screen Alignment

E-26
IT600_E_P14_39.p65
More user manuals on
Whenever the response of the touch screen is poor, or the operations being executed do
not match with the location you are tapping on the touch screen, please recalibrate the
alignment of the touch screen using the following method.
• Press the "Fn" key and then press the "4" key after confirming that "F" is displayed
in the lower right corner of the screen. The following screen is displayed.
∗ The following screen can also be displayed by accessing the menus and tab in order
of Start ➝ Settings ➝ Stylus ➝ Calibration.
• Press the stylus against the center of the target mark (+ mark) as indicated on the
screen. The screen shown below appears after you press the stylus against the target
at five different locations.
• Press the Execute key or tap anywhere on the touch screen.
26
ManualsBase.com
05.10.25, 9:50 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

It-600m30It-600m30cIt-600m30rIt-600m30cr

Table of Contents