Table of Contents
Advertisement
Click "Continue" to save the settings made and go back to the Web management
interface; click "Apply" to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.1.4 SNMP
Simple Network Management Protocol (SNMP) is a troubleshooting and
management protocol that uses the UDP protocol on Port 161 to communicate
between clients and servers. The router can be managed locally or remotely by
SNMP protocol.
Parameter
SNMP
System Description
System Contact
System Name
System Location
System Object ID
Trap IP Address
Community name
(read-only)
Description
Select "Disable" or "Enable" to disable or enable the
SNMP feature.
Enter the system description of the router.
Enter the contact person and/or contact information for
the router.
Assign an administrative name for the router.
The physical location of the router.
This is the vendor object identifier: the vendor's
authoritative identification of the network management
subsystem contained in the entity.
Destination IP address of the SNMP trap.
Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
29
Advertisement
Table of Contents
