Rip - Intellinet 524780 User Manual

Parameter
Enable
DDNS Provider
Host Name
Username
Password
E-mail
Key
Add/Modify/Remove
Dynamic DDNS Table The DDNS you have configured will be added to the list.
When you finish, click "Apply Changes." You'll see the following message
displayed on Web browser.
Click "Continue" to save the settings made and go back to the Web management
interface; click "Apply" to save the settings made and restart the router so the
settings will take effect after it reboots.

5.2.2.6 RIP

RIP is an Internet protocol you can set up to share routing-table information with
other routing devices on your LAN, at your ISP's location, or on remote networks
connected to your network via the ADSL line.
Most small home or office networks do not need to use RIP; they have only one
router, such as this one, and one path to an ISP. In these cases, there is no need
Description
Check the box to enable DDNS function.
Select your DDNS service provider here. This router
supports DynDNS and TZO service providers.
Enter the domain name you've obtained from the DDNS
service provider.
Enter the username assigned by the DDNS service
provider.
Enter the password assigned by the DDNS service
provider.
Enter the e-mail account that your DDNS service
provider assigned to you.
Enter the password that your DDNS service provider
assigned to you.
These buttons are for you to maintain the DDNS table.
39