Scheduling - A-Link WNAP4G User Manual

and ping the device. You can ping a specific IP to test whether it is alive.
Afterwards, click on "Save" to store your settings or click "Undo" to give up
the changes.

6.4 Scheduling

You can set the schedule time to decide which service will be turned on or off. The added
rules will be listed and you can decide if you want to enable the set rules by checking or
un-checking the "Enable" box in the icon below.
Add New Rule: To create a schedule rule, click the "New Add" button or the "Add New
Rule..." button at the bottom in the icon above. When the next icon popped out you can
edit the Name of Rule, Policy, and set the schedule time (Week day, Start Time, and
End Time). The following example configures "wake-up time" everyday from 06:00 to
07:00. Afterwards, click "save" to store your settings or click "Undo" to give up the
changes.
A-LINK WNAP4G User Manual
98