A-Link WNAP4G User Manual page 42

address.
3 Address auto configuration setting: Disable or enable this auto
configuration setting. You may set stateless or stateful (Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
3.1.2.6
To set up this 6RD tunneling connection you will need to have the following
information from your IPv6 Internet Service Provider. If you do not have this
information, please contact your ISP. Remote IPv4 Address, IPv4 Mask Length,
Remote Prefix, Prefix Length, Primary DNS Address, and Secondary DNS
Address
A-LINK WNAP4G User Manual
6RD
42