A-Link WNAP4G User Manual page 36

At Combo WAN setting page, you can choose Disable, Load Sharing, or
Failover options.
This Combo WAN feature will be deactivated if you select "Disable" from the
list.
A. Load Sharing
The feature of Load Sharing will activate 3G WAN and Ethernet WAN
simultaneously.
a. Combo WAN Mode: Choose Load Sharing mode.
b. Remote Host for Keep Alive: Type an IP address or domain name of
remote host to detect if Internet connection is alive.
c. Primary WAN: The primary WAN is the WAN type you set at Internet Setup
page.
d. Secondary WAN: Press "New Add" button to add the secondary WAN. If
the primary WAN is 3G or iBurst, then you can choose one of Static IP,
Dynamic IP, and PPPoE as the secondary WAN. However, 3G can be the
36
A-LINK WNAP4G User Manual