A-Link WNAP4G User Manual page 39

3.1.2.1
1. IPv6: Disable or enable the IPv6 functions.
2. IPv6 Connection: you can choose Static IPv6 from the list.
3. WAN IPv6 address settings: you can add IPv6 address / subnet prefix
length / default Gateway / Primary DNS address and secondary DNS address.
4. LAN IPv6 address settings: you can add LAN IPv6 address, and IPv6
Link-Local address will be showed automatically.
5. Address auto configuration setting: Disable or enable this auto
configuration setting. You may set stateless or stateful( Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
3.1.2.2
1. IPv6 DNS settings: You may obtain IPv6 DNS automatically or set DNS
address manually for Primary DNS address and secondary DNS address.
2. LAN IPv6 address settings: You can add LAN IPv6 address, and IPv6
Link-Local address will be showed automatically.
3. Address auto configuration setting: Disable or enable this auto
configuration setting. You may set stateless or stateful( Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
A-LINK WNAP4G User Manual
Static IPv6
DHCPv6
39