A-Link WNAP4G User Manual page 24

"Auto-Detection", and the router will try to detect and configure the required 3G
service settings automatically. Otherwise, you can select "Manual", and
manually fill in the required 3G service settings provided by your carrier or ISP.
c. Country
d. Telecom
e. 3G Network
f. APN
choose country and telecom. You can also change it manually.
g. PIN Code: Enter the PIN Code for your SIM card if required. (Optional)
h. Dialed Number
telecom. You can also change it manually.
i. Account
choose country and telecom. You can also change it manually.
j. Password
choose country and telecom. You can also change it manually.
k. Authentication
as "Auto" if you are not sure.
l. Primary DNS
(Optional)
m. Secondary DNS
(Optional)
n. Connection Control: There are 3 options to start connection:

Auto Reconnect (Always-on): The device will always try to link to Internet.
 Connect-on-demand: The device won't try to connect to Internet until LAN
PCs or devices try to go to Internet. Once Internet connection is established,
this device will drop the connection if maximum idle time is reached.
A-LINK WNAP4G User Manual
*
: Select your country.
*
: Select your telecom.
*
: Select the 3G network
*
: APN information for your 3G data card. It will show a value after you
*
: It will show a value after you choose country and
*
: The user name for 3G connection. It will show a value after you
*
: The password for 3G connection. It will show a value after you
*
: Choose authentication of 3G connection. You can leave it
*
: You can assign a Primary DNS server if required.
*
: You can assign a Secondary DNS server if required.
24