A-Link WNAP4G User Manual page 31

required.
f. Connection Control: There are 3 options to start connection:
 Auto Reconnect (Always-on): The device will always try to link to Internet.
 Connect-on-demand: The device won't try to connect to Internet until LAN
PCs or devices try to go to Internet. Once Internet connection is established,
this device will drop the connection if maximum idle time is reached.
 Manually: The device won't try to connect to Internet until users press
"connect" button at Status page. Once Internet connection is established, this
device will drop the connection if maximum idle time is reached.
g. Maximum Idle Time: the amount of time of inactivity before disconnecting
your PPPoE session. Set it to zero or enable "Auto-reconnect" to disable this
feature.
h. PPPoE Service Name: Optional. Input the service name if your ISP
requires it.
i. Assigned IP Address: You can input a IP address if you got a fix IP
address from ISP.
j. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users.
The default MTU value is 0 (auto).
k. NAT disable: You can disable NAT feature if required.
l. IGMP Proxy: Enable this feature allows multicast stream (e.g. IPTV
stream) to pass-through this device.
F. PPTP
31
A-LINK WNAP4G User Manual