Others - A-Link WNAP4G User Manual

to connect with this device, it means the client can't access to the Internet either.
Choose "allow" or "deny" to allow or deny the clients, whose MAC addresses are
not in the "Control table" (please see below), to connect with this device.
3. Association control: Check "Association control" to enable the controlling of
which wireless client can associate to the wireless LAN. If a client is denied to
associate to the wireless LAN, it means the client can't send or receive any data
via this device. Choose "allow" or "deny" to allow or deny the clients, whose MAC
addresses are not in the "Control table", to associate to the wireless LAN.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the
changes.

4.1.6 Others

1. MAC Address for Wake-on-LAN: Input MAC address of host that you want
to use WOL.
2. Discard PING from WAN side: When this feature is enabled, any host on
the WAN cannot ping this product.
3. DoS Attack Detection: When this feature is enabled, the router will detect
66
A-LINK WNAP4G User Manual