Access Control - A-Link WNAP4G User Manual

These settings are for FTP service.
1. FTP: Enable or disable functions of FTP server on this device.
2. FTP Port:
The default port is 21, but sometimes you might want to hide your FTP service by
changing it. We have the ability to receive the request on non-standard FTP port,
but please be noted, some NAT router could not support non-standard FTP port,
that means some of your clients might have to use passive mode to get file.
3. FTP Max Connection per IP: You can limit the maximum number of FTP
connection for each client.
4. FTP MAX Clients: You can indicate how many FTP clients can access the
FTP service on this device at the same time.
5. Client Support UTF8:
This option is used when your FTP client could support UTF8. Usually, the
default value "No" is okay for most clients.

5.2.4 Access Control

5.2.4.1
The default setting is "Guest mode", all clients could access as anonymous
users.
If you want to control the permission, change to "Authorization mode" and save it,
then go to "User Configuration".
A-LINK WNAP4G User Manual
User Access Configuration
83